Step 1
Position cartridge with label facing you.
Locate the drum axle spring on the cartridge
left side. Using a spring hook, remove the
spring from the axle.
(See Photos 1, 2 & 3)
Photo 1
Photo 3
Photo 4
CL P 600 TE CH
E-mail: info@futuregraphicsllc.com
Website:
www.futuregraphicsllc.com
US 1 800 394.9900
Int’l +1 818 837.8100
FAX 1 800 394.9910
Int’l +1 818 838.7047
ATLANTA, USA
US 1 877 676.4223
Int’l +1 770 516.9488
FAX 1 877 337.7976
Int’l +1 770 516.7794
MIAMI, USA
US 1 800 595.429
Int’l +1 305 594.3396
FAX 1 800 522.8640
Int’l +1 305 594.3309
TORONTO, CAN
CAN 1 877 848.0818
Int’l +1 905 712.9501
FAX 1 877 772.6773
Int’l +1 905 712.9502
NEW YORK, USA
US 1 800 431.7884
Int’l +1 631 345.0121
FAX 1 800 431.8812
Int’l +1 631345.0690
SYDNEY, AUS
AUS 1 800 003.100
Int’l +62 02 9648.2630
FAX 1800 004.302
Int’l +62 02 9548.2635
BUENOS AIRES, ARG
ARG 0810 444.2656
Int’l +011 4583.5900
FAX +011 4584.3100
MONTEVIDEO,URY
URY 02 902.7206
Int’l +5982 900.8358
FAX +5982 908.3816
JOHANNESBURG, S.A.
S.A. +27 11 974.6155
FAX +27 11 974.3593
MELBOURNE, AUS
AUS 1 800 003. 100
Int’l +62 03 9561.8102
FAX 1 800 004.302
Int’l +62 03 9561-7751
CORPORATE
LOS ANGELES, USA
The Samsung CLP-600 was introduced in
spring of 2006. The Samsung
CLP-600/650 is a follow-on product to
the Samsung CLP-500/550/510.
The printer prints up to 21 ppm with a first
page out in less than 20 seconds. The
cartridge is an all-in-one design rated at
4000 pages for black and all colors.
CLP-600
CLP-600N
CLP-650
CLP-650N
CLP-K600A
– Black
(Capacity – 4K pages)
CLP-C600A
– Cyan
(Capacity – 4K pages)
CLP-M600A
– Magenta
(Capacity – 4K pages)
CLP-Y600A
– Yellow
(Capacity – 4K pages)
Tools required:
#1 Phillips Screwdriver
Small Flat Screwdriver
Spring Hook
Thumb Screws
Supplies Required:
DRUMPOWDERCPT
Soft Lint-Free Cloth
Conductive Grease
Anhydrous Isopropyl Alcohol
Vacuum or dry Compressed Air
Technical Instructions
Overview
Printers/OEM Info
Tools & Supplies
1
Step 2
Locate the cartridge pins with the threaded
holes. Screw into the threaded holes the
thumb screws or comparable screw with a
M3 X 0.5 thread and at least 8mm in length.
Remove the pins and separate the cartridge.
(See Photos 4, 5 & 6)
Photo 5
Photo 6
Photo 2
RE V: 6/ 04 / 07