Home New Arrivals! Company Info Publications Special Features Contact Us
Overview
Required Tools
Supplies Required
Prepare Work Area
Disassembly
Cleaning the DebrisCavity
Reassemble the Cartridge
Recommended Supplies
Brother HL-630 OPC Cartridge DI
DOC-0178
O
VERVIEW
These instructions cover the recycling of the Brother 630 OPC cartridge used in laser printers, and fax machines that use the
Brother 630 laser engine. The OPC cartridge is rated for approximately 15,000 pages.
The purpose of this procedure is to vacuum out toner that will have spilled inside the cartridge during shipping and/or rough
handling, to clean the Waste chamber, and to replace the OPC Drum with a new long Life Replacement Drum,(Drum-630), and
Wiper Blade (WB-630). This procedure should also be used to examine the internal parts of the cartridge for possible damage,
or wear should the printing of the cartridge be poor and not correctable by any other means.
Background shading vertically down the page is a major problem with these cartridges. Shading is normally caused by two
items; the wiper blade, or the developer. If your customer was experiencing shading before the cartridge was removed, we
recommend that the wiper blade be replaced, and the cartridge tested before continuing with the rest of the procedure. If the
cartridge prints normally, the rest of the cartridge should be recycled. If the shading continued, the developer is probably bad,
and the cartridge is good for parts only. No new developer is currently available. Keep in mind that if the drum is bad, you will
get horizontal shading 3x across the page. The developer will cause vertical shading. Changing the wiper blade is a very
simple task, and will only take a minute or two.
R
EQUIRED
T
OOLS
1. Phillips head screw driver.
2. Jewelers screwdriver
3. Spring Hook
4. Small Common screw driver
5. Hammer
6. 12" Long 1/8" thick metal rod
7. Vacuum approved for toner
8. Safety goggles and breathing mask.
WARNING: Always wear safety goggles and breathing mask when working with or around toner. Do not disperse the
toner into the air. Use approved toner vacuums and filters at all times.
Approved Vacuum systems: Toner approved vacuum . The HCTV canister style vacuum or the Atrix AAA/OmegaS portable
style vacuum.
