10
CLICK HERE TO GO THE INDEX
© All rights reserved, Easy Group, LLC. Version 2.0
All trademarks are property of their respective owners. Uni-Kit
®
has no association with any of the manufacturers listed here such as Hp, Epson, Lexmark, Xerox, etc.
All logos and brand names shown here are used for identification purposes only. It is illegal to reproduce these instructions without written licensing consent from Easy Group LLC.
Canon Cartridges
BC-20 & BC-23
High Capacity Cartridge
1. Use the eyelet screw to remove plug located on top of the cartridge.
2. Connect the needle to the syringe and fill with ink.
3. Insert the syringe through the filling hole and push into the cartridge. Note: You may
feel a slight pressure because the cartridge contains a sponge.
4. Inject up to 30 ml. of ink then reseal the cartridge with the plug that was removed from
step 1.
5. Rinse the syringe with water and dry for future use, or use with a different color ink.
6. Reinsert the cartridge(s) and run a priming cycle as per printer instructions.
Note: Immediately refill any empty cartridges.
Filling Hole
