CE505A 2,300 pgs
(for both HP LaserJet P2035
and HP LaserJet P2055)
CE505X 6500 pgs
(only for HP LaserJet P2055)
HP P 20 55T E CH
REV. 04/13/09
Photo 1
PHOTO 2
PHOTO 3
HP LaserJet P2035 printer
(CE461A)
HP LaserJet P2035n printer
(CE462A)
HP LaserJet P2055dn printer
(CE459A)
HP LaserJet P2055x printer
(CE460A)
Step 1
If the OPC drum is going to be replaced, use
Drum Drive Axle Removal Tool to remove
the drum drive axle
(See photo 1).
You will
install it later on a new drum. To remove the
drive axle, insert the C-shaped claw of the
tool under the drive flange of the axle and
use the lip on the drum end plate as a lever-
age to pry the drive axle out
(See photos 2
& 3).
Technical Instructions
Printers
Cartridge Info
Tools
1
E-mail: info@fgimaging.com
Website: www.fgimaging.com
CORPORATE
LOS ANGELES, USA
US 1 800 394.9900
Int’l +1 818 837.8100
FAX 1 800 394.9910
Int’l +1 818 838.7047
KANSAS CITY, USA
US 1 913 871.1700
FAX 1 913 888.0626
NEW YORK, USA
US 1 800 431.7884
Int’l +1 631 588.7300
FAX 1 800 431.8812
Int’l +1 631 588.7333
MIAMI, USA
US 1 800 595.4297
Int’l +1 305 594.3396
FAX 1 800 522.8640
Int’l +1 305 594.3309
TORONTO, CAN
CAN 1 877 848.0818
Int’l +1 905 712.9501
FAX 1 877 772.6773
Int’l +1 905 712.9502
MELBOURNE, AUS
AUS 1 800 003. 100
Int’l +62 03 9561.8102
FAX 1 800 004.302
Int’l +62 03 9561-7751
SYDNEY, AUS
AUS 1 800 003.100
Int’l +62 02 9648.2630
FAX 1800 004.302
Int’l +62 02 9548.2635
BUENOS AIRES, ARG
ARG 0810 444.2656
Int’l +011 4583.5900
FAX +011 4584.3100
SAO PAULO, BRAZIL
Int’l +55 11 5524.8000
BOGOTÁ, COLOMBIA
Int'l +57 1410.8842
CALI, COLOMBIA
Int'l +57 2661.1166
MONTERREY, MEXICO
Int' +52 55 5333.9800
JOHANNESBURG, S.A.
S.A. +27 11 974.6155
FAX +27 11 974.3593
ZHUHAI, PR CHINA
Int’l +86 756 3359608
FAX +86 756 3359681
© 2009 Future Graphics Imaging Corporation. All rights reserved. Future Graphics Imaging Corporation (FGIC) is a distributor of compati-
ble replacement parts and products for imaging equipment. None of FGIC's products are genuine OEM replacement parts and no affiliation
or sponsorship is to be implied between FGIC and any OEM.
Drill
3/32-inch Drill Bit
3/8-inch Drill Bit
3/4-inch Hole Saw with
Pilot Drill Bit
Needle-nose Pliers
Scratch Awl
Small, Flat-blade
Screwdriver
Phillips Screwdriver
Putty Knife with stiff
blade, 1 1/4” wide
Utility Knife
X-Acto Knife
Drum Drive Axle Removal
Tool
Ohmmeter
Supplies Required:
99% Alcohol
Conductive Grease
Cotton Swabs
Lint-free Cloth
Padding Powder
Drum
Toner
Wiper Blade
Chip
Fill Plug
(HP1505FILLPLUG or
HP2600FILLPLUG)
3 screws
