Printers
Brother DCP-135 DCP-150c DCP-153c
MFC-235 MFC-260c
Instructions
Note : The cartridges for each colour have the same basic
design so the instructions are the same for all LC970
1.
Lay down some newspaper to help prevent any mess
2.
Cut around the edge of the cartridge with a sharp knife.
(
fig.1)
3.
Grab cartridge casing at ink nozzle end and pull apart
This may take a bit of force the 1st time. (
fig.2)
4.
Attach the filling tube to the syringe and then fill with
10ml of the required colour.
5.
Pierce the top part of the cartridge, as shown in (
fig.3)
,
and
inject the ink into the cartridge.
6.
Once the cartridge is full then seal the filling hole with a
bit of tape.
7.
Reattach the casing and seal in place using another bit
of tape.
(fig.4)
8.
Place the cartridge back in the machine and run a
couple of head cleans to ensure the best results.
For more info go to
SLOWLY
help.jrinkjet.co.uk
Items Required
Original Brother LC970 Cartridge, Syringe & Filling Tube,
Knife, Ink 10ml for the colours or 20ml for the black, Tape
Refill Instructions -
Brother LC970
fig.1
fig.2
fig.3
fig.4
