HP® 4200/4300 Toner Cartridge Remanufacturing Instructions…
1
HP
?
4200/4300 Remanufacturing Instructions
Oasis Imaging Products, Inc. Technical Support: 888 757 0762
Memphis /
888 833 5727
Nashua, NH
Reference Information:
Q1338A (4200) 690 grams
Q1339A (4300) 1020 grams
OEM Yields:
4200: 12000 @ 5%
4300: 18000 @ 5%
Tools Required:
Phillips screwdriver
Small flat head screwdriver
Compressed air or toner vac
1.
Remove the plastic drum shutter actuator arm
from the plastic post using a small flat head
screwdriver.
Note:
Be careful not to lose the
spring located in the plastic housing.
Remove the metal bar from both ends of the
cartridge and put assembly aside. (Fig. 1)
Fig. 1
2.
Remove the four screws that hold the
left end cap in place. (Fig.2)
Fig. 2
3.
Remove the left end cap after removing
the screws. (Fig. 3)
Fig. 3
HP
?
4200 HP
?
4300
