Home New Arrivals! Company Info Publications Special Features Contact Us
overview
Required Tools
Supplies Required
Prepare Work Area
Disassembly
Separate Debris Cavity, and Drum
Re-Assemble Toner Supply Housing, Photo Conductive Drum and Debris Cavity
Recommended Supplies
Fuji-Xerox XP-12 Toner Cartridge
DOC-0186
O
VERVIEW
These instructions cover the disassembly of the Fuji-Xerox XP-? toner cartridges. The Fuji-Xerox XP-? Laser engine is a 17
PPM, 600 DPI engine that uses a cartridge that looks similar to the Canon LBP-EX cartridge, but is different. This toner
cartridge is rated for 10,000 pages at 5% coverage. The Xerox part number for this cartridge is the 113R00095, the Apple Part
# is M4683G/A. The most popular printers that use these cartridges are the Xerox 4317, 4517, and the Apple LaserWriter 12/
640 PS. We have been able to confirm that these printers use a Fuji-Xerox engine, but have not been able to confirm the actual
engine number. We will post any updates to this on our Fax on Demand system, and our Web site.
The purpose of this disassembly is to vacuum out toner that will have spilled inside the cartridge during shipping and/or rough
handling, to clean the debris cavity and to fill the toner supply housing with new toner. The disassembly can also be used to
examine the internal parts of the cartridge for possible damage should the printing of the cartridge be poor and not correctable
by other means.
This procedure should be read in it’s entirety before proceeding with the actual recycling process.
R
EQUIRED
T
OOLS
The tools needed to successfully and safely recharge toner cartridges are as follows:
1. Toner approved vacuum. The ATRIX HCTV shop vac style toner vac, or the ATRIX AAA/Omega-S portable toner
vacuums.
2. Some type of approved toner vacuuming system is important because toner consists of very fine particles that will pass
right through a normal vacuum filter, and blow out the exhaust, creating a real mess.
3. A small screw driver (Common Style)
4. A Phillips head screwdriver with removable tips
5. Needle Nose Pliers
6. Small metal rod (small Allen wrench, straightened heavy paper clip) -to push pins in with
S
UPPLIES
R
EQUIRED
1. 4517 black toner 450g
2. Toner Magnet cloths
3. lint-free synthetic cotton 4"x 4" pads
4. 99% pure Isopropyl Alcohol (FR-8)
