Home New Arrivals! Company Info Publications Special Features Contact Us
Overview
Tools Required
Supplies Required
Prepare Work Area
Disassembly
Remove the OPC Drum
Cleaning the DebrisCavity
Cleaning the Toner Supply Housing
Re-assemble the Toner Supply Chamber, OPC
Drum and Debris Cavity
Recommended Supplies
Fuji-Xerox XP-4 Toner Cartridges
DOC-0245
O
VERVIEW
These instructions cover the recharging of the Fuji-Xerox XP-4 toner cartridge used in the Epson Actionlaser 1100, and 1400
and other printers using the Fuji Xerox XP-4 Laser Engine. These printers have a resolution of 300dpi, and the cartridges are
rated for 4,000 pages at 5% coverage. This cartridge is unique in that the Transfer Charge Roller is built into the cartridge, not
the printer. For this reason care must be taken when handling this cartridge to avoid contaminating the roller.
The purpose of this disassembly procedure is to vacuum out toner that will have spilled inside the cartridge during shipping and/
or rough handling, to clean the debris cavity, and to clean and fill the supply chamber with new toner. This disassembly
procedure should also be used to examine the internal parts of the cartridge for possible damage, or wear should the printing of
the cartridge be poor and not correctable by any other means.
NOTE: These Instructions should be read completely before proceeding with the recharge.
T
OOLS
R
EQUIRED
Phillips head screw driver.
Small Common Screwdriver
Toner approved vacuum
Needle Nose Pliers
Flush cutting wire cutters
Razor Blade Knife
Ruler, or straight edge
Safety goggles and breathing mask.
S
UPPLIES
R
EQUIRED
