Brother® HL 1240 Toner Cartridge Remanufacturing Instructions…
1
1
1
Lexmark E210
Remanufacturing Instructions
Oasis Imaging Products, Inc. Technical Support: (888) 627-6555
Reference Information:
Materials Needed:
Oem part # 10SO150 Drum: EDR1105
Toner: E2TN1055
OEM Yield:
2,000 pages @ 5%
Approxima te Rema n Time:
15 minutes
Tools Required:
#2 Philips Screwdriver, small flat head screwdriver, needle-nose pliers, end
clippers, vacuum, compressed air.
1. With end-clippers cut and remove the
small plastic wall surro unding the center
locking screw. Using the needle-nose
pliers remove the screw and replace it
with a #2 self-tapping screw before re-
assembly (Fig 1).
2. Remove the other fo ur screw fro m the
top of the cartridge (Fig 2).
Fig. 1
Fig . 2
3. Push in locking tabs on the front of the
cartridge (Fig 3).
4. Carefully remove the top cover of
cartridge (Fig 4).
Fig. 3
Fig. 4
5. Vacuum out all remaining toner from
the toner hopper, sponge delivery roller
and cartridge interior (Fig 5).
6. Remove the three screws that hold the
gear side endplate in place, and then
remove the end plate (Fig 6).
Fig. 5
Fig. 6
